5,000 Gallon Jet Refueler

Call for Pricing

Chassis International Chassis, Diesel, Auto

Tank Polished Aluminum Tank

Pumping 300GPM System

Configuration One Overwing & One Underwing Hose Reel

Tank

5,000 U.S. gallons (3% outage), 20,000 liter aluminum tank fully baffled, single compartment, overturn protection, 20" manhole with 10" fill opening and vent and one 20" inspection manhole.

Chassis

Conventional cab-chassis, diesel engine, automatic transmission. (Detailed specifications available upon request.)

Dimensions

Length, 31', width, 102", height, 120".

Refueling System

600 GPM / 2400 LPM.

Pump

Centrifugal type, PTO driven, hot shift. 300 GPM to 600 GPM / 2400 LPM

Filter/Monitor

Horizontal F/M with differential pressure gauge, purge valve, pressure relief valve, air eliminator and drain valve. F/M meets IP specifications.

Deadman and Pressure Control

Air operated inline deadman/pressure control and shut-off valve provides primary pressure control. Secondary pressure control regulated by mechanical hose end control valve.

Meter

One meter, with large numeral reset counter and totalizer, registers in whole U.S. gallons.

Venturi

Sized to compensate for pressure loss.

Hose Reels

Two reels; one single-wrap sized for 2 1/2" x 50' hose, and one sized for 1 1/4" x 50' hose, non-ferrous internals, explosion proof electric rewind motors and switches, auxiliary manual rewind. A shut off valve is installed immediately upstream of reel.

Hoses

One 2" x 50' and one 1 1/4" x 50' aviation fueling hose with N/R male couplings, certified to API 1529.

Overwing Nozzle

Jet overwing nozzle with swivel and 100 mesh strainer.

Underwing Nozzle

One international standard 3-lug underwing nozzle with quick disconnect and swivel.

Bottom Loading

Includes a jet level sensor control system for automatic, high-level shut-off with precheck. The bottom loading adapter, capable of accepting a standard underwing nozzle, is installed on the drivers side. A gauge and shut-off valve shall be supplied immediately down stream of bottom load adapter for re-circulation and testing.

Defuel

Air operated fuel/defuel system operates in conjunction with bottom loading system to include overfill protection.

Piping

Aluminum - 150 PSI rated working pressure.

Test

Flow tested with fuel for performance to rated specifications.

Finish

Cab painted factory white. Aluminum tank in natural polished finish. Equipment painted silver.

Safety Features

Static reel with 50' cable and bonding clamp, brake interlock system, emergency shut-down system and two fire extinguishers.

Compliance

Meets all applicable NFPA 407 & 385 codes. Design complies with ATA-103 requirements. JIG compliance can be met for exporting units upon request.

Options

A complete list of options is available on request, including electronic flow meters with data collection, additional hose reels and meters, additive injection, and other items.