Author Archive: Greg Kelley

Author Archives for Greg Kelley

Please contact us at the following or submit a form on our contact page:

Parts@Garsite.com Phone: (800) 532-2405

CONTACT US
Garsite Military Fueling Equipment - GSE Truck

Ground Support Truck tank capacity is adaptable to needs. Option for single or split with compartments (split only available for 2000 gallons and above) for diesel and gasoline. Tank is fully baffled and includes overturn protection, future vapor recovery ready, manhole with venting, and full-length under-frame. Available in aluminum or stainless steel. Meets all requirements of DOT 406 specifications.

Chassis – Various cab types and drivetrain options are available. (Detailed specifications available upon request.)

Standard Dimensions – 26’L x 96” W x 116”H

PUMP: PTO-driven positive displacement or centrifugal options along with electric options available.

FILTER SYSTEM: Facet filter housing with differential pressure gauge, air eliminator, water defense, and drain valve. Options include top-mounted DP Gauges for diesel & mogas, filter monitor, and millipore sample port.

FLOW METER: One meter, with large numeral, reset counter and totalizer, register head.

HOSE REELS: Single compartment with one hose reel. Split compartment with two reels, one on each [...]

AVGAS Fuel Above Ground Storage Systems

Tanks: 500 to 30,000 Gallons - Pumping Systems: 22 GPM in-to-plane to 400 GPM bulk loading
Garsite Avgas Fueling System

All AVGAS Fuel Above Ground Storage Systems include the following:

TANK: Fuel Farm tanks range from 500 Gallons to 30,000 Gallons Interior Stainless Steel, Overfill Valve, Clock Gauge with Alarm, Emergency Vent, Pressure Vacuum Vent, Interstitial Leak Detection Gauge, Fill Piping with Check Valve, Butterfly Valve & 3” Cam-Lock Adapter, Vapor Recovery Adapter, Fill-Rite Hand Sump Pump.

DISPENSING SYSTEM: Electronic Pump & Motor, Deadman, Filtration, Calibrated Meters, Hoses, Nozzles, and Much More.

For your convenience and a superior design we include:
– Through-head piping to reduce piping and connections from tank top piping.
– Nearly all components are housed under a protective canopy.
– Double-wall tank systems include an integral secondary containment and eliminate the need for a dike.

Garsite uses all stainless-steel piping for pumping systems and offers Stainless Steel Primary Above Ground Storage Tank. This package provides:
– Clean and dry fuel.
– Reduced maintenance expenses.
– [...]

Jet Fuel Above Ground Storage Tank & Pumping System

Tanks: 500 to 30,000 Gallons - Pumping Systems: 50 GPM in-to-plane to 600 GPM bulk loading
Garsite Above Ground Storage Tank - Fuel Farm

All Jet Fuel Farms include the following:

TANK: Above ground storage tanks available with Interior Stainless Steel Floating Suction, Overfill Valve, Clock Gauge with Alarm, Emergency Vent, Pressure Vent, Interstitial Leak Detection Gauge, Fill Piping with Check Valve, Strainer and 4” Cam-Lock Adapter, Fill-Rite Hand Sump Pump.

DISPENSING SYSTEM: Electronic Pump & Motor, Deadman, Filtration, Calibrated Meters, Hoses, Nozzles, and Much More.

For your convenience and a superior design we include:
– Through-head piping to reduce piping and connections from tank top piping.
– Nearly all components are housed under a protective canopy.
– Double-wall tank systems include an integral secondary containment and eliminate the need for a dike.

Garsite uses all stainless-steel piping for fueling systems and offers Stainless Steel Primary Above Ground Storage Tank. This package provides:
– Clean and dry fuel.
– Reduced maintenance expenses.
– Durable and lasting equipment.

All units are designed and built [...]

UAV Refuel/Defuel Cart

200 Gallon (757 Liters) Fuel Tank - 35 GPM (133 LPM) Refuel Rate - 30 GPM (114 LPM) Defuel Rate through 1-1/2” Hose
Garsite Fuel Bowser

TANK: 200 gallons (757 liters) stainless steel tank, double wall design, single compartment, 16” (406mm) manhole with 10” (254mm) fill opening with emergency pressure / vacuum vents.

CHASSIS: The Refuel/Defuel Cart undercarriage utilizes a towable two axle, four wheeled rolling chassis design that is self-supported on its own rigid or non-suspension axle mount configuration suitable for ramp usage at speeds up to 15 mph. It is designed with a steerable front tow bar arrangement so that it is easily towed or tugged with normal aircraft ramp equipment. Minimum steering angle for tow bar is +/- 40 degrees. The tow bar includes a mechanism to hold it in the upright position so it is not a trip hazard when not in use.
TRANSPORTING: Unit has built-in fork lift pockets for lifting complete unit. Unit also has lifting lugs and tie downs installed for lifting with a crane and securing while transporting by highway, air, rail [...]

Avgas Refueler

Available with 750-1,500 Gallon Capacity
Garsite Avgas Fuel Truck

Avgas Refueler with 750-1,500 U.S. gallon aluminum tank fully baffled, single compartment, overturn protection, 20” manhole with 10” fill, and pressure vacuum vents.

Chassis – Conventional cab-chassis gasoline engine, automatic transmission. Diesel and cab-over models are available. (Detailed specifications available upon request.)

STANDARD DIMENSIONS: 17’L x 84”W x 96”H

PUMP: Positive displacement type, PTO driven.

FILTER/MONITOR: 40 GPM / 150 LPM filter/monitor with built-in differential gauge, air eliminator and pressure relief.

METER: One meter, 60 GPM rated with large numeral reset counter and totalizer, registers in “tenth” gallons.
HOSE REEL: Sized for 1½” x 50’ hose, non-ferrous internals, explosion-proof electric rewind motor and auxiliary manual rewind. A shut-off valve is installed immediately upstream of the hose reel.

HOSE: One 1” x 50’ aviation fueling hose with N/R male couplings, certified to API 1529.

NOZZLE: One avgas refueler overwing nozzle with swivel and 100 mesh strainer.

BOTTOM LOADING: Includes a jet level sensor control system [...]

Towable Hydrant Dispenser

450 GPM / 1,700 LPM

CHASSIS: RUNNING GEAR: Heavy-duty four wheel trailer. Fully rated suspension (for towing up to 35 MPH). Ackerman style steering axle.

FEATURES: Fully self-contained and maintenance-free pressure control system (no external air source, electrical source, or nitrogen source required). All aluminum deck and hose reel (for low maintenance). Fully integrated solar powered system; includes battery for the interlock system.

STANDARD DIMENSIONS: 128”L x 65”W x 64”H

HYDRANT COUPLER: Pressure controlling coupler to mate with 4” API hydrant valve.
FILTER / MONITOR: Filter/monitor, 450 GPM rated and equipped with a direct reading differential pressure gauge, purge valve, pressure relief valve, air eliminator and drain valves. F/M meets EI/IP 6th edition specifications.
DEADMAN CONTROL: Deadman handle with 50’ cord.
PRESSURE CONTROLS: Hose and control valve and pressure
controlling coupler.
METER: 450 GPM rated with large numeral reset counter and totalizer, registers in whole U.S. gallons.
SINGLE WRAP FUELING HOSE REEL: Aluminum single [...]

Back to top